Firestop Transparent Wooden Coating V5T
Firestop Transparent Wooden Coating V5T is a dual-component, acid-curable MF resin system enhanced with liquid polyphosphate technology. It combines exceptional transparency with highly effective fire protection for wooden substrates. Upon exposure to fire, the coating rapidly expands to form a stable char layer, providing both aesthetic preservation and enhanced structural safety for the wood substrate.
Firestop Coating
Firestop Coating
- Product Description
- Parameter
-
Product Features
Applicable to multiple fire scenarios
Good transparency
Labeling and formaldehyde free
Short drying time
Good durability and weathering resistance
Product Applications
Fire protection of historic wooden architecture
Fire safety for newly built wooden buildings
Protection of traditional ethnic architectural woodwork
Use in temples, palaces, and other heritage structures
-
Product Data
Appearance High-transparency, two-component fire-retardant coating Main Components Resin/water (V/V) Density (25 °C) Mixed 1.03–1.10 g/cm³ Mixing Ratio (A:B) 2.5:1 Non-volatile Content (by mass) ≥75% Viscosity (25 °C) Component A: 600–1000 mPa·s; Component B: ~8000 mPa·s Curing Rapid at 25 °C; touch-dry in 5 h, scratch-resistant after 24 h Reaction to Fire Minimum residual length ≥0 mm 390 Average residual length ≥150 mm 403 Average smoke temperature ≤200 °C 175.6 Recommended Application Rate 300–500 g/m² (wet) Coating Schedule Typically 2 uniform coats by brush,
with an interval of ≥40 min between coats
Product Inquiry
Do you have any questions about purchasing products or solutions that interest you? Fill out the form and we will reply to you within 24 hours.
CONTACT US
Headquarters Office
Contact: Vivian Wang
Tel:400-099-0939
Email: vivian.wang@helwe.net
Singapore Office
Contact: SS MOORTHY
Tel: +65 - 90218105 / +62 - 8111081006
Email: shan.moorthy@iepccsolutions.com
Coverage: Singapore, Malaysia, India, Indonesia
Friendly Links: www.pinfa.eu